CMT Lama per traverso vena, serie industriale
44,74 €
Tasse incluse
Lama per traverso vena, serie industriale
Spedizione
24/48 ore
Reso
Gratuito
CARATTERISTICHE TECNICHE DEI DENTI HW:
-altezza dente in mm: | 8~10 |
-qualità, codice ISO: | K10 |
-durezza (HV10): | 1.765 |
-resistenza flessionale (N/mm2): | 2.150 |
Fori di trascinamento COMBI3: 2/7/42 + 2/9,5/46,5 + 2/10/60.
Impiego: per tagli traverso vena.
Macchine: seghe a banco, seghe circolari e macchine portatili.
Materiale: legni teneri e duri, pannelli stratificati e truciolari grezzi.
D | F | FT | Z | K | P | a | b | Codice | Disponibilità |
---|---|---|---|---|---|---|---|---|---|
200 | 30 | 2/10/60 + 2/7/42 | 36 | 3,2 | 2,2 | 15° | 10° ATB | 285.036.08M | |
200 | 30 | 2/10/60 + 2/7/42 | 48 | 3,2 | 2,2 | 15° | 15° ATB | 285.048.08M | |
250 | 20 | COMBI3 | 40 | 3,2 | 2,2 | 15° | 10° ATB | 285.040.10H | |
250 | 30 | 2/10/60 + 2/7/42 | 40 | 3,2 | 2,2 | 15° | 10° ATB | 285.040.10M | |
250 | 30 | 2/10/60 + 2/7/42 | 60 | 3,2 | 2,2 | 10° | 15° ATB | 285.060.10M | |
250 | 30 | COMBI3 | 48 | 3,2 | 2,2 | 15° | 10° ATB | 285.048.10M | |
250 | 35 | 40 | 3,2 | 2,2 | 15° | 10° ATB | 285.040.10R | | |
250 | 35 | 60 | 3,2 | 2,2 | 10° | 15° ATB | 285.060.10R | | |
260 | 30 | 2/10/60 + 2/7/42 | 48 | 2,8 | 1,8 | 15° | 10° ATB | 285.048.11M | |
260 | 30 | 2/10/60 + 2/7/42 | 60 | 2,8 | 1,8 | 10° | 15° ATB | 285.060.11M | |
270 | 30 | 2/7/42 | 42 | 2,8 | 1,8 | 15° | 15° ATB | 291.270.42M | |
275 | 20 | 42 | 3,2 | 2,2 | 15° | 10° ATB | 285.042.11H | | |
280 | 30 | 2/10/60 + 2/7/42 | 64 | 2,8 | 1,8 | 10° | 15° ATB | 295.064.11M | |
300 | 20 | COMBI3 | 48 | 3,2 | 2,2 | 15° | 10° ATB | 285.048.12H | |
300 | 30 | 2/10/60 + 2/7/42 | 48 | 3,2 | 2,2 | 15° | 10° ATB | 285.048.12M | |
300 | 30 | 2/10/60 + 2/7/42 | 72 | 3,2 | 2,2 | 10° | 15° ATB | 285.072.12M | |
300 | 30 | COMBI3 | 36 | 3,2 | 2,2 | 15° | 10° ATB | 285.036.12M | |
300 | 30 | COMBI3 | 60 | 3,2 | 2,2 | 15° | 10° ATB | 285.060.12M | |
300 | 35 | 48 | 3,2 | 2,2 | 15° | 10° ATB | 285.048.12R | | |
300 | 35 | 72 | 3,2 | 2,2 | 10° | 15° ATB | 285.072.12R | | |
305 | 30 | 2/10/60 + 2/7/42 | 54 | 2,8 | 1,8 | -5° Neg. | 15° ATB | 294.054.22M | |
305 | 30 | COMBI3 | 72 | 3,2 | 2,2 | -5° Neg. | 15° ATB | 294.072.22M | |
315 | 30 | 2/10/60 + 2/7/42 | 36 | 3,2 | 1,8 | 15° | 10° ATB | 285.036.13M | |
315 | 30 | COMBI3 | 54 | 3,2 | 2,2 | 15° | 10° ATB | 294.054.12M | |
350 | 30 | 2/10/60 + 2/7/42 | 54 | 3,5 | 2,5 | 15° | 10° ATB | 285.054.14M | |
350 | 30 | 2/10/60 + 2/7/42 | 72 | 3,5 | 2,5 | 15° | 10° ATB | 285.072.14M | |
350 | 30 | COMBI3 | 84 | 3,5 | 2,5 | 10° | 15° ATB | 285.084.14M | |
350 | 35 | 54 | 3,5 | 2,5 | 15° | 10° ATB | 285.054.14R | | |
350 | 35 | 84 | 3,5 | 2,5 | 10° | 15° ATB | 285.084.14R | ||
400 | 30 | COMBI3 | 48 | 3,5 | 2,5 | 20° | 10° ATB | 285.048.16M | |
400 | 30 | COMBI3 | 60 | 3,5 | 2,5 | 10° | 15° ATB | 285.060.16M | |
450 | 30 | 2/10/60 | 54 | 3,8 | 2,8 | 15° | 15° ATB | 285.054.18M | |
450 | 30 | 2/10/60 | 66 | 3,8 | 2,8 | 10° | 15° ATB | 285.066.18M | |
500 | 30 | 2/10/60 | 60 | 3,8 | 2,8 | 15° | 15° ATB | 285.060.20M | |
500 | 30 | 2/10/60 | 72 | 3,8 | 2,8 | 10° | 15° ATB | 285.072.20M |
- Utensile con taglienti in metallo duro
- Utensile poco rumoroso
- Imballo in cartone
Commenti (0)
Ancora nessuna recensione da parte degli utenti.